Mokume Gane Central Tennessee Copperhead Necklace
A Mokume Gane piece with orange sapphire eyes and copper/brass elements.
Design Details
Palette:
Pattern:
Gem Stone 1:
Orange Sapphire
Additional Notes:
Starting at $750.00
Production time: Please inquire
SKU: AJNMOK00851
Prices do NOT include the cost of stones or setting fees.
Customization options available! All Arn Krebs Mokume Gane Rings are CUSTOM and made-to-order. Rings are available in any size, width, profile, pattern, metal combination and finish. All rings are made individually from start to finish, so each one is completely unique and will vary slightly from what is pictured. Variations in color and patterning are natural features of Mokume Gane and photos shown are for illustration purposes only.
This stunning Mokume Gane piece is set with orange sapphires for the eyes and features copper and brass.
Resources
Discover other rings with the design details from this listing.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

palladium, sterling silver

A stone of matching width to the band is set flush, typically done with a baguette cut.

Small stones are set snug side by side, held by tiny "prongs" carved right into the surface of the ring.

The outside profile of the ring comes to a peak at the center line of the ring, but is still gently rounded off for a soft edge, the inside is comfort fit.

The metal surrounds the stone completely and can be made of gold, silver, palladium or mokume gane metal. The metal is added onto the ring.

18kt yellow gold, 14kt red gold, 14kt palladium white gold

The metal from the ring reaches around the stone from two sides and forms an open bezel.

The metal from the rings band curves around the stone to embrace it in an s-curve from two points.

The ring is built up to surround the stone entirely and is made of the mokume gane metal the ring is made of. The stone is sunk into the ring so it sits flat.

Many small stones, usually diamonds or sapphires, are set in a channel that runs part way across the ring.

14kt red gold, 14kt yellow gold, palladium

Forged pattern made to resemble clouds and skies.

Custom billets are made to order, please contact us if interested. Additional cost will apply, pricing depends on metals used.

Custom billets are made to order, please contact us for pricing.

Custom patterns are all made to order, please contact us if interested.

Carved pattern, many small circular shapes clustered together looking like raindrops on water.

Forged pattern, all straight lines running parallel around the ring.

14kt red gold, palladium, sterling silver

The silver layers are etched lightly to create valleys and lower patterns in the mokume. Giving the surface some texture and adding visual contrast.

The silver layers are etched lightly to create valleys and lower patterns in the mokume, and the silver is also darkened to an almost black color by the oxidation.

Many small stones, usually diamonds or sapphires, are set in a channel that runs all the way around the ring.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

14kt red gold, 14kt yellow gold, sterling silver

14kt red gold, 14kt yellow gold, palladium, sterling silver

14kt red gold, sterling silver

14kt yellow gold, palladium, sterling silver

The edges of the ring are flat against the finger such as a cut section of pipe would be. There are no domed sides. The outside of ring is flat with eased edges, the inside is comfort fit.

The stone is held in a bezel, held up from the rest of the band by arms reaching from the band.

Forged pattern, long thin lines with patterned knots throughout, knots are eyelike in shape.

Forged pattern, long thin lines with patterned knots throughout, knots are eyelike in shape and made of one solid metal color.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Also called gypsy setting, when small stones are set in the band in a flat or flush way.

Textured carved pattern, 3D forms meant to feel like mountains or hills.

A large, usually round center stone with many small stones around the center stone in a circle resembling a halo. Sapphires and diamonds are predominantly used.

A strip of metal running along one or both edges of the ring, with a lightly hammered organic texture.

The surface of the ring is hammered to make small shiny indents over the whole surface.

Additional carving of the ring’s surface in various spots around the ring to create a subtle rippling, bumpy texture.

A layer of plain silver or gold is added to the inside of the mokume ring so that the metal against the skin isn't mokume but is instead a plain metal.

The ring is domed so that the edges against the finger are more comfortable to wear. The outside of ring has a low dome profile, rounded edges, the inside is comfort fit.

The stone is surrounded by a thick piece of metal, typically carved to match the texture of the Guri Bori pattern, resembling rock.

Rails that run on an edge of the ring that have a scalloped or indented repeating edge.

The metal surrounds the stone completely and is also made of mokume gane.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

The metal is shaped into claws or points and grips the stone from 4-6 points and can be made of gold, silver, palladium or mokume gane metal.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

An added ridge that sits at the center line of the band, creating a higher point resembling a mountain ridge.

No etching of the silver layer so that all the layers of the mokume are the same and the surface of the ring is completely flush.

14kt white gold, palladium, sterling silver

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

14kt yellow gold, sterling silver

The metal is shaped into claws or points and grips the stone from 2 points and can be made of gold, silver, palladium or mokume gane metal.

The band is circular in shape on the inside, but a soft square with the corners slightly rounded on the outside.

A strip of metal running along one or both edges of the ring, with a smooth surface.

Carved pattern with diagonal lines that lead into starburst like shapes.

Aenean lacinia bibendum nulla sed consectetur. Cras justo odio, dapibus ac facilisis in, egestas eget quam.

A layer of an accent color of metal that runs through the ring in a stripe.

The ring is formed so that it holds the stone, usually a sapphire or diamond through tension.

An added layer of metal added to the surface of the ring, to highlight a specific metal color.

Carved pattern with diagonal lines. A combination of flowing lines and wood grain style organic shapes.

Combination pattern alternates between a twist linear look and small dots to make the droplets.

Forged pattern, all lines, symmetrical joint where the lines meet.

Combination pattern with the forged linear elements of the Vortex pattern, and angled and carved elements of the Twist pattern for more movement.

Carved pattern with large areas of color in organic shapes resembling islands.
Discover our blog articles related to this listing.